[Kuebler Entire Range Product Survey / Shortform Catalogue Download (6M)]
[Encoder Encoder Overview (1.2M)]
[Encoder Counter Overview (4.6M)]
[Encoder Full Line 2008 Catalogue Download (30M)]
[Counter Full Line 2008 Catalogue Download (15M)]
[Process Full Line 2008 Catalogue Download (4M)]  

Incremental Encoders

Innovative sensors measure angle, distance, speed...
Incremental encoders by Kuebler are distinguished by high resolution and reliability. These are available in solid and hollow shaft versions, and are suitable for all industrial applications, including heavy duty applications where ruggedness is essential. The range covers miniature encoders, 24mm dia. through to 90mm dia. for solid shaft, and 24mm to 100mm dia. for hollow shaft (inside bores up to 42mm currently).

Special Features:

• Up to 5000 PPR available at short notice.
• Up to 36,000 PPR available.
• Voltage or current sinusoidal output available.
• Up to 12,000 rpm.
• Scanning rate up to 200 KHz.
• RS422 or push-pull outputs.
• Various shaft lengths and diameters available (custom too).
• Cable or connector versions.
• Hollow shaft encoder has short built-in depth.
• Ex-proof and special steel housings.
• Very high shock-resistance.

Absolute Encoders

For absolute detection of positions without any loss of data...
Absolute encoders are available in Single and Multi-turn versions, both hollow shaft or standard shaft designs. Interfaces include parallel versions, SSI or BUS systems.

Special Features:

• Integrated Circuit Technology.
• A new assembly design in combination with only one multi-layer printed circuit board for encoders up to 13 bit.
• Use of an Opto-Asic leads to a huge improvement in shock resistance.


• Up to 13 bit Gray Code (Singleturn resolution).
• Multi turn up to 25 bits, (13 bits/rev, 12 bits-4092 revolutions).
• All parameters programmable with multi-turn.
• Up to 10,000 rpm.
• 4 - 20mA output available.
• RS422 or push-pull outputs.
• Parallel, SSI or BUS outputs.
• Various shaft lengths and diameters available (custom too).
• Cable or connector versions.
• Hollow shaft encoder has short built-in depth.
• Ex-proof and special steel housings.
• Very high shock-resistance.

Linear Measurement Technology

Innovative sensors measure distance, speed, angle ...
New draw wire and non-contact technology from Kuebler provides excellent accuracy and reliability. The LIMES (Linear Measurement System) can measure long distances with excellent accuracy and repeatability. These are suitable for all industrial applications, including heavy duty applications where ruggedness is essential.

Special Features - LIMES:

• Measure up to 100 meters or more.
• Accuracy up to .005 mm.
• Encoder type pulses provides easy interface.
• Immune to dust or liquid contamination.
• Easy to use self adhesive magnetic band.
• Non-contact technology provides longevity.

Special Features - Draw Wire Encoders:

• 1 meter up to 6 meter draw wire available.
• Draw wire actuators available with 15 - 40 meter draw.
• Encoder output, incremental or absolute.
• Excellent accuracy and repeatability.
• Incremental, analogue or sin wave output available.

Totalizing Counters

Electronic and electromechanical counters to count pulses, frequency...
Totalizers are available in many versions; electromechanical with or without reset, or electronic with LCD or LED display. PCB versions are available with low power consumption.

Special Features:

• Kuebler is the leading specialist of low-cost, high quality electro-mechanical miniature counters (low power consumption, high degree of shock and magnetic resistance, max IP 65, various mounting styples including PCB mounting).

Preset Counters

Simple solutions for control applications...
Electronic preset counters with LED, LCD or backlit LCD displays are available with one or several presets. They are extremely simple to program. Electromechanical preset counters with stationary preset value are available as low cost alternatives.

Special Features:

• Programmable by the user as pulse counter, preset timer, hour meter, or ratemeter.
• Batch count available.
• Optional RS232, RS422 or RS485 serial interface.

Hour Meters/Elapsed Time Meters

Detection of warranty times, maintenance intervals, machine running time ...
Electromechanical and electronic hour meters are available in a variety of mounting styles and dimensions including DIN sizes. Round hole, square hole and DIN rail mount versions are available. Hour meters are available in resettable or non resettable or presettable versions, and come with AC or DC operation. They are suitable for fixed or mobile applications.

Special Features:

• Miniature hour meters for direct PCB mounting.
• Counting up to a preset time or down from preset time
• Front panel of electronic hour meters lockable to prevent unauthorized adjustment of preset time or reset
• Dual preset times available
• Optional RS232, RS422 or RS485 serial interface.
• Hour meter and counter available in single package e.g. for counting number of activations and total running time

Process Displays & Process Controls

Process displays, temperature displays, process controllers, operational data displays
The CODIX family of products cover a large range of LED analogue input displays and process controls as well as thermocouple and millivolt inputs. They also cover temperature measurement sensors in the milli volt input range. Versions are available with instantaneous values and integrative functions to provide total rating over time. Applications include temperature monitoring and control, flow control, level control, rotational speed display, in woodworking machinery, bakeries, drying plants / ovens, machine tools and plastics industry, chenical and pharmaceutical plants, food and drink processing equipment, paper machines, glass producing machines, etc.

Special Features:

• High luminosity for easy viewing
• AC and DC versions available
• 0 - 20mA, 4 - 20mA, 0 - 10V, 2 - 10V, -10 - +10 V, 0 - 20V inputs
• 0 - 400/4000 ohms, PT100, PT1000, Ni100, B, E, J, K, N, R, S, T thermocouple inputs
• Linearity scaleable / characteristic curve programming up to 24 programmable points
• Integration function for totalizing
• Upper and lower set points with hysterisis
• Large displays / keys for gloved hand operation
• Optional RS232 interface for parameter setting and measured output values